Model Number

I-JL6

Rolling Shutter Door Alarm

No burglar dares to pull up the rolling shutter door when the Alarm is on duty…

Ⅰ. Function:
QQlion Rolling Shutter Door Alarm is mainly applied in the premises of the small store ,shop or the private garage, which usually uses rolling shutter door as the protection door. It will give a timely high-decibel siren locally (even a phone call if you like to add other accessories to it) to scare the intruders when the rolling shutter door is pulled up, the loud siren is also helpful to arouse the neighbors’ attention to the illegal intrusion as well.

Ⅱ.The System Configuration

1. The Rolling Shutter Door Detector, 1, which is installed on the   

rolling shutter door to detect whether the door is pulled up .

2. The Remote Controller, 2, which is always with the master, it is manually used to control the operation status of the alarm. The alarm will not give a siren out for 30 seconds when the “Off” button of The Remote Controller is pressed once.

3. The Wireless Alarm, 1, which is usually plugged into a socket in the site, it will give a sounding siren when the rolling shutter door is pulled up .

Ⅲ. Main Features：

Convenient installation, wireless connection, plug and play.

Easy operation, wireless remote control.

Million Groups Encode IC, hard to decode.

Water splashing proof , leading longevity of the product.

High decibel siren to scare the burglar.

System self-examining mechanism, low battery indication.

The alarm is made of the fire-resistant materials.

Ⅳ. Installation

The installation can be separated into two steps:

1. Installation for the Alarm

     Please plug the alarm to the socket on the    wall in the store or garage. It works properly when the siren blows up after you press the test key on the remote controller; It works normally when the siren mutes after you press the mute key on the remote controller.

2. Installation for the Detector

     Before sticking the detector on the bottom metal bar of the rolling shutter door, please clean the bar with the attached sand paper, make sure that there is no rust on it or rubbish under it before sticking. You can choose any position on the bar for sticking.

Ⅴ. Operation

1. The ways to disarm the alarm ：

1) The siren will blow up for 2 minutes when the door is pulled up for at least 5 cm above the ground, and it will stop automatically in 2 minutes.

2) You can stop the siren by pressing the “Mute” button on the remote controller.

3) In order to avoid the loud siren when you pull up the rolling shutter door, you can press the “Mute” button on The Remote Controller first before your pulling up, QQLion Rolling Shutter Door Alarm will keep in silence for 30 seconds after the “Mute” button pressing, you can make the full use of this 30 seconds to pull up and enter into the door without any siren.

   2. LED Indicators

     1) The Detector                2) The Alarm                  3) The Remote Controller

Ⅵ.Major Technical Specifications:

Alarm power supply: AC220V

Siren decibel: > 100dB

Communication：Wireless/315MHz

Transmitting Distance: ≤100m (in open space)

Number for the controlled detectors : 30

Number for the controlled remote controllers : 8

Ⅶ. Trouble Shooting

   1. The detector’s transmitting LED is not on while the door is pulled up after the installation.

     1) There are some rubbish under the detector.

     2) There is no battery in the detector, or the battery is not installed correctly.

2. The Alarm does not blow up the siren while the door is pulled up.

     1) The distance between the detector and alarm is far beyond.

     2) Low battery shortens the communication distance.

     3) The “Mute” button is pressed, that will lead 30 seconds mute-siren.

3. The siren can not be turned off after the remote controller pressing.

     1) Low battery to the remote controller shortens the communication distance.

Ⅷ. Function advantages compared with other brands