Model Number

JS100-A

 Electronic Watchdog JS100

Burglar likes to make a detour to avoid encountering the Electronic Watchdog…

Ⅰ. Overview

When the strangers break into your home, the armed Electronic Watchdog will make an immediate response by sounding high-decibel siren locally to scare the illegal intruders, and meanwhile its siren will arouse neighbors’ attention too.

When the relatives and friends pay a visit to your home, the Electronic Watchdog will function as a wireless doorbell.

When the customers come into your store or friends come to your home, the disarmed Electronic Watchdog will make notifying sound as if it were a tireless doorkeeper.

The operation is quite easy, just press the button “alarm” on the remote controller (when you leave home ), the Electronic Watchdog will be “on duty “ to safeguard the family; Just press the button “disarm” on the remote controller (when you return home ), the Electronic Watchdog will not be  on alert, just work as a doorkeeper or doorbell.

Ⅱ. The System Configuration

1.       Door & Window Detector: 2 pairs, installed on the inside of the doors or windows, to detect the “Open” and “Close” status of the doors and windows, the main entrance detector can be used as doorkeeper too.

2.       Remote Controller: 2 , is always with the master,  used to control the “Arm” and ‘Disarm” status of the Consol.

3.       Wireless Doorbell: 1, installed on the main entrance, used as doorbell.

4.       Console: plugged on any socket in the room, it is the processing centre of the system.                                       The system topological chart

Ⅲ. Main Features：

Convenient installation, wireless connection, plug and play.

Easy operation, easy to learn, wireless remote control.

High decibel siren to scare the burglar.

Doors and windows can be safeguarded.

Doorbell function, 36 ring music optional.

Doorkeeper function.

Million Sets Encode IC, hard to decode.

System self-examining mechanism, low battery indication.

Ⅳ. Installation：

1.     JS100 Electronic Watchdog can be installed as

   the following figure:

2.  Special Notes for Installation for the Parts.：

      1) Door & Window Detector.

Installation Position:

Wireless door & window detectors are generally

installed on the inside of the main entrance door

as well as the doors and windows of the kitchen  

or the balcony. A wireless door & window

detector consists of a magnet and a transmitter.

One is installed on a door or window frame,

while the other is installed on the moving door or window.

Special Notes for Installation:

Make sure the detector is installed on the inside of a door or window.

The distance between the transmitter and the magnet should be less than 10mm.

The antenna should be pulled out after installation.

When the battery voltage is below 7V, the Low Battery indicator will be on to remind you to change batteries.

Major Technical Specifications:

Power Supply: 23 A /12V Batteries;   Operating Voltage: 12V;

Operating Current: ≤3.5mA;  Communication: Wireless/315MHz

Transmitting Distance: ≤100m (in open space);  Weight (battery not included) : 60g

Measurement: 90mm×55mm×22mm

      2) Wireless Doorbell

        Installation Position:

        Wireless doorbell is generally installed on the outside of the main entrance

door or on the wall at the main entrance, at a position between 1.2m—1.7m

above the ground.

Special Notes for Installation:

The transmitting antenna should be pulled out after installation.

When battery voltage is below 7V, a red light will be on to remind you to

change batteries when Doorbell Button is pressed.

Major Technical Specifications:

Power Supply: 23 A /12V Battery;   Operating Voltage: 12V;

Quiescent current: ≤1μA (4);   Operating Current: ≤3.5A;

Communication: Wireless/315MHz;  Transmitting Distance: ≤100m (in open space)

       3) Console:

         Installation Position:

         When it gives out “Di” sound, and all the LED lights flash for once after the console is plugged into the socket in the room, that means the console works normally.

 Special Notes for Installation:

 Please make sure that the console is plugged tightly into the socket in the room.

 Please make sure that the distance between the console and all the detectors and doorbell are within in the limit of 100m.

 Major Technical Specifications:

Input Voltage: ~220V;   Quiescent current: ≤1μA (4);

Communication: wireless /315MHz  ;Alarm Current: ≤3.5mA;

Siren Volume: 100dB   ;Weight:

Measurement: 100mm(L)*70mm(W) * 60mm(H)

Ⅴ. Operation：

1.       LED Indicators For different Parts:

1)      Door & Window Detector                2)  Wireless Doorbell

2)      Remote Controller                      3)  The Console 

2.  Daily Operation Instructions

1)      Arming the System

To arm the system, do the following:

Press the “Arm” key on the remote controller, you can hear a long sound of “Di”, then the

Console has been armed, that means any intrusion to the doors or windows can be detected.

2)      Disarming the System

When the alarm is triggered, we need to disarm the system, do the following:

Press the “Disarm” key on the remote controller, you will hear two short sound of “Di, Di”, then the Console has been disarmed (The siren will stop if it is on).

Ⅵ. Trouble-shooting

1.       The siren does not blow up after the door is opened.

1)      Check the battery to see whether it is in low battery or is properly installed.

2)      To see whether the distance between the console and the detectors is too far.

3)      The detector encoded address does not match the console decoded address.

2.       The doorbell does not work after the installation.

1)      Check the doorbell battery to see whether it is properly installed or it is in low battery.

2)      To see whether the distance between the console and the doorbell is too far.

3)      The doorbell encoded address does not match the console decoded address.

   3.  The console responses nothing after pressing the keys on the remote controller.

1)  Check the controller battery to see whether it is properly installed or it is in low battery.

2)  Check the console to see whether it is powered on.

3)  The controller encoded address does not match the console decoded address

4)  To see whether the distance between the console and the controller is too far.

   4.  The console does not response after it is powered on.

       1)  Check the console to see whether it is properly powered on.

       2)  The console is faulty.